If you have any problem with these, just send us a message and we will take care of it. New genuine BMW pins and connectors will be used on all orders. The 84-85 Square c101 connector will be a remanufactured connector (Unless you provide us with your original connector). We have the M52TU, M54, S54, and S62 EWS deletes available. All you will need to do is send us your ECU whenever you are ready for it to be modified.
Radiator fan options are available. Also, we can pre-wire your harness to work with "gpeterson" CAN module. Let us know if you will be needing this option.Please send us a message with the following information. 1 Year, model, and chassis type (E21, E28, E30, E34, or E36) (Example: 89 325i E30).
2 New engine choice (Example: M54, E46 harness). 3 Additional options for E30: (Oil level sensor, ABS, Secondary Air Pump, M3 Oil Temperature). Or Additional options for E36: (Secondary Air Pump, A/C instructions). These harnesses are NOT copies of anyones work. We used the e46 ETM and the e39 ETM which is available online for everyone to use, and therefore the e46 or E39 engine harness is desired.If you have another harness, let us know so that we can confirm that the adapters will work with that particular engine harness. All fuses and relays are included with all harnesses (Except for the S54/S62 fuel pump relay). If you rather have a standard relay (Euro option), then I can provide the relay (But please let me know, otherwise it will be setup for the s54 or s62 relay). PLEASE READ: All harnesses have been measured out for LHD vehicles and placing the DME in the glovebox (For E30) or on the passenger side DME compartment (For E36). The standard S54 harnesses'can' reach those locations by changing one thing.
The link for these instructions will be included. Let us know if you are interested in one for a RHD model. Let us know if you have any special requests, as these are custom made for your chassis. We can make these adapters that work with the following BMW engines.M62TU (Bosch ME7.2) "DME 7" will be seen on the casing. M62 (Bosch ME5.2.1) "DME 1" will be seen on the casing. M62 (Bosch ME5.2) "474" will be seen on the casing. We make these for all different e21, e28, e30, e34, and e36 models. E30: 82-85, 86-87, 88-89, 90-94. A/C wiring not included for the E21, E28, E30 or E34. I can provide instructions for the E36.
If you have another type of harness that you would like, please send us a message. We also make harness adapters for. BMW m40 1.6/1.8 chassis.
BMW M50/M52(single vanos)/S50(US or Euro)/S52. If you have any questions, please feel free to ask.The text above is of my own writing and effort. The item "Bmw M54 M52TU S54 S62 M62 M62TU in E30 E36 Engine Harness Wiring Adapter E39 E46" is in sale since Friday, April 7, 2017. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other". The seller is "letthebasskick04" and is located in Moody, Alabama.
This item can be shipped worldwide.