The Ford Emblem rear-view camera is specifically designed for select Ford trucks with an aftermarket in-dash multimedia or navigation receiver installed. Your aftermarket receiver must feature an integrated video monitor and a composite video camera input.With the Ford Emblem rear-view camera, you'll be able to view what's behind you on your in-dash receiver's video monitor when you put your vehicle in reverse. The Ford Emblem rear-view camera is integrated into a custom-designed mounting bracket. A new Ford "blue oval" logo emblem replaces the factory Ford badge on your truck's tailgate. You will need to remove the factory Ford badge and then install the emblem camera/emblem assembly in place of it.
The new emblem snaps firmly into the camera's mounting bracket after installation. The emblem camera includes a 23' composite video cable which will need to be routed through a hole in the bed behind the tailgate and up to the dash, where it connects to the aftermarket head unit. A 30 power/ground cable is supplied on the camera end to tap into power and ground at the reverse light. Parking Guide Line on/off Selectable.
Parking guide lines are provided on the video signal to aid you in backing up the vehicle. If you do not want this feature, two unconnected white wires on the video cable should be connected together and insulated to delete the guide lines. A rear view camera system should have the capability to produce a'mirror' (or'reverse') image through the camera and/or monitor. It doesn't matter whether the camera produces a'mirror' image, or the monitor reverses the image left to right, or as on some high end systems, both the camera and monitor can switch between'normal' and'mirror' images.
Why do you want a'mirror' image? In order to see the same type of image that you would see in a rear view mirror, the camera and/or monitor must be capable of reversing the image produced. This capability will provide the same type of image through a rear view camera system that you would see if you were looking into a rear view mirror, and that's exactly what you want for safe operation. MINy Camera with Ultra HD CMOS Sensor & NightVision Technology.
Image: Mirror / Standard Selectable. What's in the box? Power / ground with composite video cable. (2) Screws & (2) inserts. The item "Ford Emblem Backup Camera 2004-2014 F150/F250/F350/F450 with Built-In Rydeen HD" is in sale since Thursday, October 19, 2017.
This item is in the category "Consumer Electronics\Vehicle Electronics & GPS\Car Video\Rear View Monitors/Cams & Kits". The seller is "backupcamera" and is located in Seaside, California. This item can be shipped to United States.