Brand New Wire

Klipsch Reference R-10SW 10 300w Subwoofer

Klipsch Reference R-10SW 10 300w Subwoofer
Klipsch Reference R-10SW 10 300w Subwoofer
Klipsch Reference R-10SW 10 300w Subwoofer
Klipsch Reference R-10SW 10 300w Subwoofer
Klipsch Reference R-10SW 10 300w Subwoofer

Klipsch Reference R-10SW 10 300w Subwoofer

Klipsch Reference R-10SW 10 300w Subwoofer. The Klipsch Reference R-10SW subwoofer is the ideal companion whether you're looking to achieve a 5.1 system or a 5.1 on the Richter scale.

The high performance subwoofer provides deep bass and placement flexibility thanks to its front firing driver and all digital amplifier. 10" Woofer: The Klipsch Reference series R-10SW powered sub is fitted with a powerful 10" copper-spun IMG (injected molded graphite) front-firing woofer for deep bass. The copper-spun IMG woofer is exceptionally light while being extremely rigid, providing remarkable low frequency response with minimal cone breakup and distortion. The front-firing woofer gives you greater placement flexibility than a down-firing woofer.

150 Watt Amp: The Klipsch R-10SW powered sub employs an all-digital 150 watt RMS (300 watt Peak) amplifier for high efficiency and dynamic bass performance. MDF Cabinet: The R-10SW is housed in a durable MDF cabinet and finished with a brushed black polymer veneer. The MDF enclosure is rigid and protects against unwanted vibration and distortion. Rear Firing Port: The R-10SW's enclosure uses a bass reflex design with a rear-firing port for greater efficiency and bigger bass. Controls: The level control, low pass crossover, and phase control allow you to blend the powered subwoofer's low-frequency tones with your system's other speakers, as well as establish the ideal level of bass. Level Control: The level control adjusts the subwoofer's volume relative to the rest of your home audio system. After the sub's level control has been set, the volume control of your AV receiver will be the volume control for both the Klipsch powered subwoofer and your connected loudspeakers. Low Pass Crossover: The variable lowpass crossover is adjustable from 40-120Hz. The crossover point chosen determines where low bass frequencies are "handed-off" from your AV system's loudspeakers to the Klipsch powered subwoofer. Set the crossover point based on the size of your systems' main left/right speakers. Phase Control: This control is used to acoustically match the subwoofer's output to your main speakers. Select the position either 0 or 180 in which your subwoofer has more output at the listening position. LFE/RCA Inputs: The Klipsch R-10SW powered subwoofer is equipped with a pair of line-level RCA-type inputs to connect the sub to your receiver or integrated amplifier. LFE Input: Most of today's AV receivers have a line-level subwoofer output (LFE). Set the powered sub's built-in crossover to "LFE" with this type of connection. Stereo Input: In absence of a subwoofer (LFE) output on your receiver, as an alternative hookup, you can connect Left & Right channel pre-amp outputs from the receiver to both the "Left/LFE" and "Right" inputs on the powered subwoofer. LED Indicator: The front-mounted LED power indicator lets you know when the sub is powered on or off. The LED will light green when the powered subwoofer is on and receiving a signal.

If the LED is dark and not lit, the powered sub is off. Auto Power On/Off: The powered subwoofer will automatically turn On when it senses an audio signal. It will automatically go into "Standby mode" after 15-20 minutes with no audio signal.

You can also choose to turn the powered sub On or Off manually from the rear-switch on the back. Placement: Klipsch powered subwoofers are designed to reproduce deep bass and deliver the impact that makes your movies and music come alive. For optimum performance, place your subwoofer in a corner of the room on the same wall as your front channel speakers. Please note that room placement can have a dramatic effect on the performance of your powered subwoofer. Corner placement, as suggested above, will increase the amount of bass output, while placing the subwoofer along the middle of a wall, or out in the room will decrease the amount of bass output.

Listing and template services provided by inkFrog. The item "Klipsch Reference R-10SW 10 300w Subwoofer" is in sale since Monday, June 8, 2020. This item is in the category "Consumer Electronics\TV, Video & Home Audio\Home Audio\Home Speakers & Subwoofers". The seller is "savings-for-you" and is located in Edison, New Jersey. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.

  • Compatible Model: Universal
  • Manufacturer Color: Black
  • Audio Inputs: Stereo L/R RCA
  • Model: Klipsch R-10SW
  • Shape: Cube
  • Compatible Brand: Universal
  • Color: Black
  • Brand: Klipsch
  • Type: Subwoofer
  • Connectivity: Wired
  • RMS Power: 150 W
  • MPN: 1016570


Klipsch Reference R-10SW 10 300w Subwoofer