Stud scan 3: Locates the center and edges of wood studs up to 1 1/2 in. Metal scan: Detects metal (such as 12 inch rebar) up to 2.36 in.
AC scan: Detects live unshielded AC wires up to 2 in. GRAPHICAL LCD DISPLAY - Which can show you details include AC Wire Warning/Stud Mode Indicator/Low battery Indicator/Metal.
Mode Indicator/AC Mode Indicator/Stud Deep Mode Indicator/Moving Direction Indicator/Stud Edge Indicator/Stud Center. Indicator, when the battery level is low, stud finder will reminding you to replace a brand new 9-volt battery. SOUND NOTICE - The multi function stud finder notice with the BEEP SIGNAL ALERT. When you have detected an object with the.
Wall scanner, the most Middle bars on the screen and a steady beep will sound notice you object is in the wall. Pencil which includ in the packeage to point the location of the object. The audible and visible cues reliably keep users.Informed when any object, such as metal, studs, AC live wiring gets found. AUTOMATIC CALIBRATION - Stud finder can be calibrated anywhere on the wall. It automatically recalibrates, when needed, to. Successfully find the center of studs in one step. Place unit flat on the wall.
Press and hold the ON/OFF button. The unit until calibration is complete about 3 seconds.
All indicators on the LCD are displayed while the unit goes through its. About 3 seconds calibration cycle.
Following the completion of calibration the unit will beep, and the selected mode icon will. STUD CENTER FINDER The Multi-Function Wall Scanner can quickly locates edges and center of metal studs, pipes, rebars.Joists behind walls, floors and ceilings, also indicates the presence of live AC wire. Battery power supply: 6F 22 9V battery.
Battery Life:1 year with normal use. Step 1: Load 6F 22 9V battery. Step 2: Choose the scanning mode. Step 3: Press before each scan.The bars indicated on the screen will go from full to none. It beeps once to indicate that it has been successfully calibrated. Do not let go of the button during calibrating. The measuring range for alternating current is 85-240 volt , sometimes the alternating current will influenced by environment , humidity or others which will also influence the measuring accuracy.
If you know that there are lines in a particularly location, but you can not find them with the sensor in "AC" mode, then use "METAL" mode. Electrical lines may be shielded by metal cladding. Stud Finder Sensor Wall Scanner 5in1 for Wood AC Wire Metal Studs Detection LCD.We suggest buyers from there do not order. If your item has any problem. Please do not return any item before communicating with us, as we have several warehouses and the addresses are different. If you are satisfied with our items and service, 5 Score DSR is highly appreciated.
In our working hours will be resumed within 48 hours. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We are growing up day by day!The item "Stud Finder Sensor Wall Scanner 5in1 for Wood AC Wire Metal Studs Detection LCD" is in sale since Friday, May 31, 2019. This item is in the category "Home & Garden\Tools & Workshop Equipment\Measuring & Layout Tools\Meters, Sensors & Probes". The seller is "egizmo365" and is located in Hebron, Kentucky. This item can be shipped to United States.