Brand New Wire

The Vinyl Source REGA R200 REWIRE KIT, full Litz wiring

The Vinyl Source REGA R200 REWIRE KIT, full Litz wiring
The Vinyl Source REGA R200 REWIRE KIT, full Litz wiring
The Vinyl Source REGA R200 REWIRE KIT, full Litz wiring
The Vinyl Source REGA R200 REWIRE KIT, full Litz wiring
The Vinyl Source REGA R200 REWIRE KIT, full Litz wiring
The Vinyl Source REGA R200 REWIRE KIT, full Litz wiring
The Vinyl Source REGA R200 REWIRE KIT, full Litz wiring

The Vinyl Source REGA R200 REWIRE KIT, full Litz wiring
New improved version of our outstanding Rega rewire kit! This new kit sports a new compact 90 degree connector that allows to mount the tonearm in shallow plinths, apart from that it reduce the effect of the cable stiffness in spring loaded chassis and respect the clearance under the Rega Planar decks. This is a very special rewiring kit for Rega R200 tonearms.

The cable is built with continuous Litz wires from the headshell till the RCA connectors, no joints in the middle, this assures the maximum quality with no losses of the delicate tiny signal. The components used to manufacture this cable are all first quality.

RCA connectors: Pro-quality Amphenol, the strict tolerance assure the perfect connection with your phono preamp. Shielding: Thickly braided tinned copper (see picture 6) made with Mil specifications assure RF interference free. Wiring: British made 30 strands OFC Litz wires with pure silk insulation for strength, flexibility and perfect conductivity.

Cable length: 1mt from the base of the tonearm to the RCA connectors, internal wiring 35 cm. Components are not enough to achieve excellence. Pseudo-differential wiring: Ensure the best ground return with maximisation of RF shielding, the cable can be easily modified into XLR connection (picture 7). Hot and Cold wires are installed with strands twisting in the opposite direction to each other for minimising the cable inductance (below the 50 pH, we cannot exactly measure it because of our testing pieces of equipment that are not sensitive enough).

These cables are hand made in the UK and supplied with exhaustive installation instructions. This listing is for the kit only, if you wish to have it installed, search our other listing for this kit with installation service included. A little warning: if your R200 has still the original anti-skating belt, we warmly suggest to replace it with a new one before rewiring, the original belt decay with time and almost 100% of them fails soon or later.

If you want to replace your belt, you can use our service. The tonearm shown in the pictures is NOT included. Glad to answer any question. The item "The Vinyl Source REGA R200 REWIRE KIT, full Litz wiring" is in sale since Sunday, November 3, 2019.

This item is in the category "Sound & Vision\Home Audio & HiFi Separates\Record Players/Turntables". The seller is "the_vinyl_source" and is located in Wishaw. This item can be shipped worldwide.

  • Model: For Rega R200
  • Country/Region of Manufacture: United Kingdom
  • MPN: Does Not Apply
  • Brand: The Vinyl Source


The Vinyl Source REGA R200 REWIRE KIT, full Litz wiring