Manual Wire Stripping Machine Copper Cable Peeling Stripper with Drill Connector

ALUMINUM CONSTRUCTION- Aluminum alloy material-manual wire Stripper with high-quality lightweight construction made of durable aluminum alloy, designed for long service time. SAFE CUTTER BLADE- Made of durable material that lasts much longer than a traditional blade, the machine has been fully guarded to ensure complete security. The blade and shaft achieve high working efficiency. EASY TO USE- There is an adjustable blade, feeding panel, and nut on the cable wire stripping machine, smoothly and suitable for any shapes cable. You can mount easily to any bench or work station. HAND-CRANK DRIVEN- It is easy to operate with hand crank or drill is driven, portable and convenient, energy saving, beautiful appearance. Also, the machine can connect to an electric drill for automatic wire stripping. WIDE APPLICATION- This machine is automatic, and the wire range is up to 25mm, widely used in wiring harness processing, aerospace wire processing, audio and data line processing, wire recycling dismantling and other industries. When you use this machine to strip the wire whose diameter smaller than 3mm, please put the wire to the small hole on bottom. The manual wire stripper is a durable aluminum alloy with high-quality, lightweight construction, convenient to carry. The fully guarded blades make it secure. Quick Blade Change: Push out the shaft, and the blade comes off. The quality blade achieves high efficiency. Suitable for removing the plastic and rubber insulation from undamaged scrap wire. You can recycle your copper wire, benefit from non-insulated pure copper wire.

Have different sized feed holes. The regulating nut allows adjustment of the distance between the blade and shaft as the work need. This manual wire stripping machine can be connected with the electric motor.

Hand-cranking, or the electric drills for your option, is easier to operate. This machine is automatic, and the wire range is up to 25mmwidely used in wiring harness processing, wire recycling dismantling, and other industries. This machine is Manual Wire Stripping Machine, Which uses drill or handles to strip scrap copper wire. The wire range is up to 25mm. It's easy to operate with the hand crank, or drill is driven, portable and convenient, energy saving, beautiful appearance.

You can get copper wire after the single blades stripping. Wire gauge range: 1.5 mm - 25 mm (0.06"-1"). 8.9"x 5.1" x 12.6. 0.045" - 1" (1.5mm 25mm).

50feet per minute in general. 1 x Wire Stripping Machine with handle. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.

California Warehouse: City of Industry, CA. New York State Warehouse: Perth Amboy, NJ. North Carolina Warehouse: Grove NC. Oregon Warehouse: AIRPORT WAY Portland, OR. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.

Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within.

Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. CA & TX & NJ & GA & NC &OR WAREHOUSE. All emails will be responded to within 12-24 hours. The item "Manual Wire Stripping Machine Copper Cable Peeling Stripper with Drill Connector" is in sale since Monday, June 26, 2017. This item is in the category "Business & Industrial\Light Equipment & Tools\Electrical Tools\Wire Stripping Machines". The seller is "happykisssoul" and is located in Perth Amboy, New Jersey. This item can be shipped to United States, all countries in Europe, Canada, Mexico, Australia.

Brand: VEVOR
MPN: 74AZY001
Weight: 15 Lbs
Wire gauge range: 1.5 mm - 25 mm
Size: 15X13X31cm
Stripping speed: Approx.
50feet per minute in general
Material: Aluminum Allory
Warranty: 2 years
Product Content 1: 1 x Wire Stripping Machine with handle
Product Content 2: 1 x Feeding panel
Product Content 3: 1 x Drill Connecting Head
Product Content 4: 2 x Wrenches
Product Content 5: 1 x Screw Set
Product Content 6: 1 x Manual